EGLO ET1780 LED Driver 300mA 3W – Constant Current Driver 6–12V Replacement Transformer

EGLO ET1780 LED Driver 300 mA 2–3 W at a glance

The EGLO ET1780 LED driver is a compact constant current driver for compatible LED modules with a fixed output current of 300 mA. With an output voltage range of 6–12 V DC and a power range of 2–3 W, it is particularly suitable as a replacement driver for compact LED recessed spotlights, downlights, and wall and ceiling lights.

Thanks to its compact dimensions of just 68 × 32 × 22 mm, the 300 mA LED driver can also be used in light housings with limited space. It is crucial for the replacement that the output current, voltage range, and power consumption of the connected LED module match the technical specifications of the driver.

300 mA constant current for LED modules

The LED driver provides a constantly regulated output current of 300 mA DC. Therefore, the ET1780 is specifically designed for LED modules that are explicitly intended for operation with 300 mA constant current.

6–12 V DC output voltage

The output voltage is within a range of 6 to 12 V DC. The maximum no-load voltage is 20 V. This makes the driver suitable for compatible LED modules with a power consumption of 2 to 3 W.

Compact design as a replacement driver

With a length of 68 mm, a width of 32 mm, and a height of 22 mm, the compact 300 mA LED replacement driver features a space-saving design. This allows it to be used as a replacement for a technically compatible driver, especially in suitable recessed lights, downlights, and smaller LED fixtures.

SELV for suitable LED applications

The ET1780 features a SELV output. The maximum ambient temperature is 40 °C, while the maximum case temperature is specified as 75 °C.

Typical areas of application

• LED recessed spotlights
• LED downlights
• Furniture lighting
• Wall lights with a compatible LED module
• Ceiling lights with a compatible LED module
• Replacement of defective 300 mA LED drivers

Technical specifications

• Product type: Constant current LED driver
• Manufacturer: EGLO Leuchten GmbH
• Model: ET1780
• Input voltage: 220–240 V AC
• Mains frequency: 50/60 Hz
• Output current: 300 mA DC constant current
• Output voltage: 6–12 V DC
• Maximum no-load voltage: 20 V
• Power range: 2–3 W
• SELV: Yes
• Maximum ambient temperature ta: 40 °C
• Maximum case temperature tc: 75 °C
• Length: 68 mm
• Width: 32 mm
• Height: 22 mm

Important note

The EGLO ET1780 is exclusively suitable for LED modules with 300 mA constant current, a power consumption of 2–3 W, and a voltage range of 6–12 V.

The driver is not a 12 V constant voltage power supply and is therefore not suitable for such constant voltage systems. Likewise, it must not be used for LED modules requiring 350 mA, 500 mA, or 700 mA. Before replacement, the technical specifications of the existing LED module or driver should be checked.

Frequently asked questions

What output current does the EGLO ET1780 provide?

The EGLO ET1780 provides a constantly regulated output current of 300 mA DC.

Which output voltage does the LED driver support?

The LED driver operates within an output voltage range of 6 to 12 V DC.

What power is the ET1780 designed for?

The EGLO ET1780 is intended for compatible LED modules with a power consumption of 2 to 3 W.

Can the ET1780 be used as a standard 12 V power supply?

No, the ET1780 is a 300 mA constant current driver and not a 12 V constant voltage power supply.

Which lights is the EGLO ET1780 suitable for?

The driver is suitable for compatible LED recessed spotlights, downlights, furniture lighting, as well as wall and ceiling lights, provided the installed LED module requires 300 mA constant current and the matching voltage and power values.